MikroTik RB941-2nD-TC hAP lite TC Router in Kenya

The MikroTik RB941-2nD-TC, officially known as the hAP lite TC, is a compact entry-level RouterOS wireless router designed for apartments, homes, small offices, training labs and basic wireless networks. It combines 2.4GHz dual-chain WiFi 4, four Fast Ethernet ports, a 650MHz processor, 32MB RAM and RouterOS Level 4 in a distinctive tower-style enclosure. 

This model belongs to an older MikroTik generation, so buyers need to understand its limitations clearly. Its Ethernet interfaces are 10/100Mbps rather than Gigabit, and its wireless radio operates only on 2.4GHz 802.11b/g/n. MikroTik rates the wireless PHY at up to 300Mbps, but the wired interfaces themselves are capped at 100Mbps per port before protocol overhead. 

The RB941-2nD-TC nevertheless remains useful where the priorities are low cost, compact size, RouterOS flexibility, basic Wi-Fi and modest internet speeds. MikroTik still maintains a current product page for the model and currently provides RouterOS v7 builds for its SMIPS architecture.

MikroTik RB941-2nD-TC Key Features

Four Fast Ethernet Ports

The RB941-2nD-TC provides four 10/100Mbps Ethernet ports with Auto MDI/X support. 

A simple deployment could be arranged as:

Ether1 → Internet / ISP router

Ether2 → Desktop computer

Ether3 → Smart TV or switch

Ether4 → Printer or another wired device

RouterOS allows the interfaces to be configured for WAN, LAN, bridge, VLAN and other roles.

Important: These Are Not Gigabit Ports

This is one of the most important purchasing considerations.

The RB941-2nD-TC does not provide 1000Mbps Ethernet. Each wired interface is limited to 100Mbps Fast Ethernet. 

For a modern 300Mbps, 500Mbps or 1Gbps fibre connection, the hAP lite TC would therefore create a significant wired bottleneck.

2.4GHz WiFi 4

The hAP lite TC provides dual-chain 2.4GHz WiFi 4, supporting:

802.11b

802.11g

802.11n

MikroTik lists a maximum wireless data rate of 300Mbps, two wireless chains and a built-in antenna gain of 1.5dBi. (MikroTik)

The 300Mbps figure is the wireless PHY rate rather than guaranteed internet throughput.

Actual wireless speeds are normally lower because of:

• Wi-Fi overhead

• Interference

• Distance

• Walls

• Client capability

• Channel congestion

• Router processing

• 100Mbps Ethernet interfaces

2.4GHz Only – No 5GHz

The RB941-2nD-TC operates on 2.4GHz only.

It does not include:

5GHz Wi-Fi

WiFi 5

WiFi 6

Dual-band wireless

This makes it less suitable for congested urban wireless environments or users who need higher Wi-Fi throughput.

The 2.4GHz band can still be useful where range and compatibility with older devices are more important than maximum speed.

Dual-Chain Wireless

The hAP lite TC uses a 2×2 dual-chain 2.4GHz radio. MikroTik lists a theoretical wireless data rate of up to 300Mbps under 802.11n. 

Dual-chain operation allows the radio to use multiple spatial streams with compatible clients.

However, the actual user experience remains heavily influenced by the surrounding wireless environment.

Built-In 1.5dBi Antennas

MikroTik specifies integrated antennas with up to 1.5dBi gain for the 2.4GHz radio. 

The antennas are built into the enclosure, keeping the router compact and reducing external components.

Wi-Fi coverage should not be described using one guaranteed distance because practical range depends on the building, interference and device placement.

650MHz QCA9533 Processor

The RB941-2nD-TC uses a single-core QCA9533 processor operating at 650MHz. 

For its original entry-level target market, this CPU can handle functions such as:

• Basic NAT

• Firewall

• DHCP

• Simple queues

• Basic VLAN configurations

• Hotspot

• Wireless access

• Simple routing

It should not be expected to perform like newer dual-core or quad-core MikroTik routers.

32MB RAM

The router includes only 32MB of RAM and 16MB Flash storage. 

That is enough for relatively simple RouterOS configurations, but it places clear limits on how complicated the installation should become.

The RB941-2nD-TC is therefore much better suited to:

Basic routing

Simple firewall rules

Home or small-office Wi-Fi

Training labs

Lightweight hotspot use

than to complex enterprise routing.

RouterOS Level 4

The hAP lite TC includes RouterOS Level 4. 

RouterOS provides functionality including firewalling, bandwidth control, DHCP, hotspot functionality, user-access controls and many other networking features. MikroTik specifically promotes these capabilities on the hAP lite TC product page. 

The operating system is preinstalled and licensed, so there is no separate RouterOS licence purchase required.

RouterOS v7 Support

Although the hAP lite TC is an older product, MikroTik currently provides RouterOS v7.24.2 for SMIPS devices on the product page. 

MikroTik's March 2026 quick guide also says the RB941-2nD-TC should be upgraded to at least RouterOS v7.10 or the latest stable release to meet applicable regulatory requirements. 

Because the router has only 32MB RAM and an older processor, complex RouterOS v7 configurations should still be kept realistic.

WPS Button

The hAP lite TC supports button-triggered WPS, allowing compatible users to join the wireless network without manually typing the Wi-Fi password. 

For security-sensitive business deployments, administrators may prefer to disable WPS and use properly managed Wi-Fi credentials instead.

cAP Mode and CAPsMAN

MikroTik also documents that the button can be configured to put the router into cAP mode, allowing it to join a CAPsMAN-managed wireless network. 

This can be useful in:

• Training environments

• Small managed Wi-Fi networks

• MikroTik laboratories

• Multi-AP demonstrations

However, the hAP lite TC uses MikroTik's older WiFi 4 wireless platform, so it should not be confused with newer WiFi 6 CAPsMAN hardware.

MicroUSB Power

The RB941-2nD-TC is powered through a 5V MicroUSB connection. 

MikroTik's user manual notes that the MicroUSB connector is used only for power, not for USB data. 

This makes the device convenient for lightweight installations because it can be powered using a compatible USB supply.

Low Power Consumption

MikroTik specifies a maximum consumption of only 3.5W.

This makes the hAP lite TC one of the lower-power RouterOS devices.

Its modest consumption can be useful for:

• Small UPS systems

• Portable network labs

• Low-power environments

• Temporary installations

Passive Cooling

The RB941-2nD-TC uses passive cooling, meaning there is no fan. 

This provides silent operation and eliminates fan maintenance.

Compact Tower-Style Design

The TC version of the hAP lite uses MikroTik's upright tower-style enclosure.

The design keeps the footprint relatively small and gives easy access to the Ethernet connections.

The product is intended for indoor placement on a flat surface. MikroTik's manual describes it as an indoor unit and lists an IPX0 rating. 

MikroTik RB941-2nD-TC Ethernet Performance

MikroTik currently publishes RFC2544 laboratory performance results for the hAP lite TC.

For 1518-byte packets, its official test reports approximately:

These are aggregate multi-port laboratory results and do not mean one Fast Ethernet interface can exceed 100Mbps.

Small-Packet Performance

With 64-byte packets, the official results decrease substantially.

MikroTik reports approximately:

This demonstrates how firewall complexity and packet size can affect the performance of an entry-level router.

MikroTik Performance Disclaimer

MikroTik says its performance testing uses specialized Xena Networks equipment under RFC2544 methodology and warns that the published values represent maximum results under the tested configuration; different real-world configurations will most likely produce lower figures. 

For the RB941-2nD-TC, the 100Mbps Ethernet interfaces are usually the first major practical limitation for modern broadband connections.

MikroTik RB941-2nD-TC for Home Internet

The hAP lite TC can still be practical where internet speeds are modest.

A simple setup could be:

ISP Router / Modem

↓

hAP lite TC

↓

2.4GHz Wi-Fi + Wired Devices

It may be adequate for:

• Browsing

• Email

• Basic social media

• Light streaming

• Smart-home devices

• Basic office work

For high-speed fibre, large downloads or several demanding users, newer hardware is preferable.

MikroTik RB941-2nD-TC for Small Offices

The router can be used in very small offices where internet usage is light.

RouterOS can provide:

• DHCP

• Basic firewall

• User management

• Simple queues

• Guest network configuration

• Basic access control

However, the 100Mbps Ethernet and 32MB RAM make it unsuitable as the main router for a busy modern office.

MikroTik RB941-2nD-TC for Hotspot Networks

RouterOS Level 4 can support hotspot functionality.

A small deployment might be:

Internet

↓

hAP lite TC

↓

Wi-Fi Users

This could potentially work in:

• Small cafés

• Reception areas

• Small shops

• Training labs

For high-density public Wi-Fi, dedicated modern access points and a more powerful MikroTik gateway should be used.

MikroTik RB941-2nD-TC for Training and RouterOS Learning

One area where the hAP lite TC can still be particularly useful is RouterOS training.

Its low cost can make it suitable for students learning:

• MikroTik RouterOS

• NAT

• DHCP

• Firewall basics

• Simple queues

• Wireless configuration

• Routing basics

• WinBox

It provides genuine RouterOS functionality without requiring expensive hardware.

MikroTik RB941-2nD-TC for Starlink

Technically, the hAP lite TC can sit behind another Ethernet-based internet gateway, including suitable Starlink network arrangements.

However, it is not a good match for taking full advantage of modern Starlink speeds because its Ethernet interfaces are limited to 100Mbps. 

For a modern Starlink installation, routers such as the:

hAP ax lite

L009

hAP ax³

RB5009

may make considerably more sense depending on the network.

MikroTik RB941-2nD-TC for Fibre Internet

The same limitation applies to fibre connections.

For an internet plan below roughly Fast Ethernet speeds, it may be usable.

For fibre services delivering:

100Mbps+

300Mbps

500Mbps

1Gbps

the Fast Ethernet ports create a bottleneck. 

For such networks, a Gigabit MikroTik router is a much better choice.

hAP lite TC vs Standard hAP lite

The RB941-2nD-TC and standard RB941-2nD hAP lite share essentially the same core networking hardware.

Both offer:

650MHz QCA9533 CPU

32MB RAM

four Fast Ethernet ports

2.4GHz WiFi 4

RouterOS Level 4

The main distinction is the physical enclosure and presentation.

The TC model uses the upright tower-style case.

RB941-2nD-TC vs hAP ax lite

For a new installation, this is one of the most important comparisons.

For almost every performance-focused new deployment, the hAP ax lite is a major upgrade.

Why the hAP ax lite Is a Better Modern Upgrade

MikroTik's current hAP ax lite uses a dual-core 800MHz ARM processor, 256MB RAM, four Gigabit Ethernet ports and 2.4GHz WiFi 6 rated up to 574Mbps.

Compared with the RB941-2nD-TC, that means:

8× the RAM

Gigabit instead of Fast Ethernet

WiFi 6 instead of WiFi 4

Newer ARM architecture

USB-C power

Stronger 4.3dBi wireless antenna system

The original hAP lite TC is therefore best chosen for low-cost legacy or basic deployments rather than as the default router for a modern high-speed network.

Advantages of MikroTik RB941-2nD-TC

The RB941-2nD-TC still provides several useful advantages:

Low hardware cost

RouterOS Level 4

Compact enclosure

2.4GHz dual-chain Wi-Fi

Four Ethernet ports

WPS

CAPsMAN/cAP functionality

Very low 3.5W power consumption

Silent passive cooling

Current RouterOS v7 builds available

Its strongest selling point is affordability combined with genuine RouterOS functionality.

Limitations of MikroTik RB941-2nD-TC

The main limitations are significant for modern networks:

Only 10/100 Ethernet

No Gigabit Ethernet

No 5GHz

No WiFi 5 or WiFi 6

Only 32MB RAM

Single-core 650MHz CPU

Older SMIPS architecture

MicroUSB power

No PoE

No SFP

These limitations mean the router should not be marketed as a high-performance solution.

Who Should Buy the MikroTik RB941-2nD-TC?

The hAP lite TC makes the most sense for:

Budget-conscious basic networks

RouterOS training

Small homes with modest internet speeds

Simple office networks

Testing and laboratory use

Basic wireless access

Legacy MikroTik deployments

For a modern business, fibre or Starlink network, newer Gigabit hardware should normally be considered first.

What's Included in the Box?

MikroTik currently lists a 5V 1A power adapter with the RB941-2nD-TC.

The router itself is powered through MicroUSB.

No separate RouterOS licence is required because the operating system is preinstalled and licensed.

MikroTik RB941-2nD-TC Price in Kenya

MikroTik currently lists a manufacturer suggested price of US$24.95 for the hAP lite TC. This is MikroTik's international reference price and not an Orbitlink Solutions Kenya retail quotation. 

Kenya pricing can vary with exchange rates, freight, taxes, distributor pricing and local stock.

Contact Orbitlink Solutions for the current MikroTik RB941-2nD-TC price and stock availability in Kenya.

Because the hAP lite TC is an older platform, buyers should also compare its local price with the much newer hAP ax lite before purchasing.

Why Buy MikroTik RB941-2nD-TC from Orbitlink Solutions?

The most important part of buying the hAP lite TC today is understanding whether it actually fits the intended internet connection.

For a low-cost RouterOS training router or a small network operating well below 100Mbps, the RB941-2nD-TC may still be appropriate. For a modern fibre or Starlink installation, however, the 100Mbps Ethernet interfaces can become an immediate bottleneck.

Orbitlink Solutions can help compare the RB941-2nD-TC with newer models such as the hAP ax lite, L009, hAP ax³ or RB5009 depending on the required internet speed, Wi-Fi coverage, number of users and RouterOS functions.

Watch the MikroTik RB941-2nD-TC hAP lite TC Video

The RB941-2nD-TC hAP lite TC represents MikroTik's classic approach to affordable networking: provide a very inexpensive hardware platform while retaining the flexibility of RouterOS. Its four Fast Ethernet interfaces, 2.4GHz dual-chain wireless and Level 4 licence are enough to create a genuine configurable router rather than a basic locked-down consumer access point. 

Its age is also important. The router was designed in an era when 100Mbps wired connections and 2.4GHz WiFi 4 were common entry-level specifications. Modern fibre, Starlink and high-speed LAN environments have moved well beyond those limits. The RB941-2nD-TC can still perform its intended basic role, but it should not be purchased with the expectation of delivering modern multi-hundred-megabit broadband throughout a network.

For new installations, MikroTik's hAP ax lite provides a much clearer upgrade path: four Gigabit Ethernet interfaces, WiFi 6, an ARM processor, 256MB RAM and significantly higher wireless capability while retaining the compact low-cost hAP concept. 

Frequently Asked Questions About MikroTik RB941-2nD-TC

What is MikroTik RB941-2nD-TC?

The RB941-2nD-TC is the MikroTik hAP lite TC, a compact wireless RouterOS router with four Fast Ethernet ports and 2.4GHz WiFi 4. 

How many Ethernet ports does it have?

It has four 10/100Mbps Ethernet ports. 

Are the Ethernet ports Gigabit?

No. They are Fast Ethernet ports limited to 100Mbps.

Does it have Wi-Fi?

Yes. It supports 2.4GHz 802.11b/g/n WiFi 4. 

Does it support 5GHz?

No. It is 2.4GHz only. 

Does it support WiFi 6?

No. It uses WiFi 4 / 802.11n. 

What is its maximum Wi-Fi data rate?

MikroTik lists a theoretical maximum of 300Mbps on 2.4GHz. 

Can it actually deliver 300Mbps internet?

Not through its Ethernet ports, because they are limited to 100Mbps each. Real wireless throughput is also lower than the advertised PHY rate.

What CPU does it use?

It uses a QCA9533 single-core 650MHz processor.

How much RAM does it have?

It has 32MB RAM. 

How much storage does it have?

It has 16MB Flash storage. 

Which RouterOS licence does it have?

It includes RouterOS Level 4. 

Does RB941-2nD-TC support RouterOS v7?

MikroTik currently provides RouterOS v7 builds for the SMIPS architecture and advises updating the model to at least v7.10 or the latest stable version. 

Does it support WPS?

Yes. MikroTik documents button-triggered WPS. 

Can it work with CAPsMAN?

Yes. MikroTik documents a cAP-mode option for joining a CAPsMAN-managed network. 

Does it support PoE?

No. This model is powered through 5V MicroUSB. 

Does it have USB for storage?

No. The MicroUSB connector is for power only, not data. 

How much power does it consume?

MikroTik lists a maximum consumption of 3.5W. 

Is it fanless?

Yes. It uses passive cooling. 

Can it work with Starlink?

It can technically sit behind a compatible Ethernet gateway, but its 100Mbps ports make it a poor choice if you want to take advantage of higher Starlink speeds.

Can it work with fibre?

Yes for modest-speed services, but the 100Mbps Ethernet ports will bottleneck faster fibre connections.

Is it suitable for CCTV?

It can provide basic routing for a small network, but it has no PoE and only Fast Ethernet. A modern Gigabit router and PoE switch are preferable for most CCTV installations.

Is the hAP lite TC better than hAP ax lite?

No in performance terms. The hAP ax lite has Gigabit Ethernet, WiFi 6, a newer ARM CPU and 256MB RAM, making it far more suitable for modern networks. 

What is the MikroTik RB941-2nD-TC price in Kenya?

Contact Orbitlink Solutions for the current exact-model price and stock availability.

Buy MikroTik RB941-2nD-TC hAP lite TC in Kenya

The MikroTik RB941-2nD-TC hAP lite TC remains a simple and affordable RouterOS wireless router for users who need basic 2.4GHz Wi-Fi, four Fast Ethernet ports, RouterOS controls and very low power consumption. 

Its biggest limitation is also straightforward: this is an older 100Mbps, WiFi 4 platform. It is best suited to entry-level and training applications rather than modern high-speed fibre or business networks.

Contact Orbitlink Solutions

Orbitlink Solutions
Lyric House, 7th Floor, Room S9, Kimathi Street, Nairobi
Call / Text / WhatsApp: +254 743 720 551
Email: info@orbitlinksolutions.co.ke
Alternative Email: orbitlinksolutions@gmail.com
Opening Hours: Monday–Saturday, 9:00 AM–6:00 PM
Availability: Nairobi pickup and nationwide delivery

Contact Orbitlink Solutions for the current MikroTik RB941-2nD-TC hAP lite TC price in Kenya, stock availability and guidance on whether this model or a newer MikroTik hAP ax, L009 or RB5009 router is more appropriate for your network.