Ubiquiti 24V PoE Adapter in Kenya – Passive PoE Injector

The Ubiquiti 24V PoE Adapter is a passive Power over Ethernet injector designed to supply power and Ethernet connectivity to compatible Ubiquiti equipment through a single network cable. It is particularly relevant to Ubiquiti's UISP and legacy 24V passive-PoE ecosystem, where many outdoor wireless devices are designed around 24V DC power.

Ubiquiti currently maintains several 24V adapter variants, including 7W low-power, 12W mid-power and 24W high-power models. The appropriate adapter depends on the exact powered device and its required voltage, current and power consumption.

Ubiquiti has also introduced the newer UACC-Adapter-PoE-24-12W, a 24V, 12W adapter with a modern design and high-speed Ethernet data path. It outputs 24V at 0.5A and includes surge and electrical protection features. 

Ubiquiti 24V PoE Adapter Key Features

Feature	Specification
Product Type	24V Passive PoE Adapter / Injector
Voltage	24V DC
Common Variants	7W, 12W and 24W
Low-Power Model	POE-24-7W-G-WH
Mid-Power Model	POE-24-12W-G
High-Power Model	POE-24-24W-G
New 12W Model	UACC-Adapter-PoE-24-12W
AC Input	100–240V AC, 50/60Hz
Data Connection	RJ45
Gigabit Support	Yes on current G/Gigabit models
Remote Reset	Supported on specified models
Surge Protection	Yes
Typical Application	Compatible Ubiquiti UISP / passive-PoE equipment
Installation	Indoor injector powering remote Ethernet device

The legacy POE-24 family uses two-pair passive powering with pins 4/5 positive and pins 7/8 negative. 

What Is a Ubiquiti 24V PoE Adapter?

The Ubiquiti 24V PoE adapter combines network data and 24V DC electrical power onto the Ethernet cable leading to a compatible device.

A typical installation looks like:

Router / Switch

↓

Ethernet Cable

↓

LAN / Data Port on PoE Adapter

↓

24V PoE Output

↓

Ethernet Cable

↓

Compatible Ubiquiti Device

The injector itself connects to AC mains power.

This means an outdoor radio or other compatible device can be installed remotely without requiring a separate electrical outlet beside it.

Ubiquiti POE-24 Adapter Range

Ubiquiti's current technical documentation lists three major variants in the established POE-24 family. 

Model	Output	Approx. Output Power	Ethernet
POE-24-7W-G-WH	24V @ 0.3A	7.2W	Gigabit
POE-24-12W-G	24V @ 0.5A	12W	Gigabit
POE-24-24W-G	24V @ 1.0A	24W	Gigabit

The difference is important.

A device requiring more power than the low-power injector can provide should be matched with the appropriate higher-capacity model.

Ubiquiti POE-24-7W-G-WH – Low-Power 24V Adapter

The POE-24-7W-G-WH is the low-power Gigabit model.

Specifications

Specification	POE-24-7W-G-WH
Output Voltage	24V DC
Output Current	0.3A
Approx. Output	7.2W
Ethernet	Gigabit
AC Input	100–240V AC
Frequency	50/60Hz
Dimensions	72 × 45 × 33mm
Weight	72.1g
Remote Reset	Yes
Reset Button	Yes
Surge Protection	Yes
Operating Temperature	0–40°C

Ubiquiti specifies two-pair power delivery through pins 4/5 positive and 7/8 negative.

This version should be used only where the powered device's maximum consumption fits within its available output.

Ubiquiti POE-24-12W-G – Mid-Power Adapter

The POE-24-12W-G increases output current to:

24V DC @ 0.5A

giving approximately:

12W output capacity. 

Specifications

Specification	POE-24-12W-G
Output	24V DC @ 0.5A
Output Power	12W
Ethernet	Gigabit
AC Input	100–240V AC
Frequency	50/60Hz
Dimensions	87 × 44 × 29mm
Weight	99g
Efficiency	75%+
Remote Reset	Yes
Reset Button	Yes
Surge Protection	Yes
Operating Temperature	0–40°C

This is one of the common choices for compatible Ubiquiti 24V equipment requiring more power than the 7W version.

Ubiquiti POE-24-24W-G – High-Power Adapter

The POE-24-24W-G is the higher-power member of this family.

It provides:

24V DC @ 1A

for approximately:

24W maximum output. 

Specifications

Specification	POE-24-24W-G
Output	24V DC @ 1A
Output Power	24W
Ethernet	Gigabit
AC Input	100–240V AC
Frequency	50/60Hz
Dimensions	88 × 57 × 33mm
Weight	159g
Efficiency	80%+
Remote Reset	Yes
Reset Button	Yes
Surge Protection	Yes
Operating Temperature	0–40°C

The additional capacity makes it suitable for compatible 24V equipment with higher power requirements.

New Ubiquiti 24V 12W PoE Adapter

Ubiquiti also offers the newer UACC-Adapter-PoE-24-12W.

This adapter provides:

24V DC

0.5A output

12W total output power

and accepts:

100–240V AC at 50/60Hz. 

It measures approximately 89 × 46 × 33mm and weighs about 100g.

2.5 GbE Connectivity on the New 12W Adapter

One particularly interesting feature of the newer UACC-Adapter-PoE-24-12W is its faster data path.

Ubiquiti's official store describes it as a 12W PoE adapter with 2.5 GbE connectivity.

This is important because PoE injectors do more than supply electrical power—the Ethernet data still has to pass through them.

A slow injector can become a network bottleneck when used with faster equipment.

The newer adapter is therefore better suited to compatible devices where a faster Ethernet data path is required.

24V Passive PoE Explained

The Ubiquiti 24V family is associated with passive PoE.

This distinction is critical.

Passive PoE does not work in exactly the same way as standards-based:

802.3af PoE

802.3at PoE+

or

802.3bt PoE++.

A passive injector places voltage on specified Ethernet conductors rather than relying on the same IEEE power-negotiation process used by compliant PoE switches.

For that reason, the exact powered-device specification should always be checked before connecting a 24V injector.

24V Passive PoE vs 48V PoE

A 24V Ubiquiti injector should not automatically be substituted for a 48V adapter.

For example:

24V Passive PoE

is commonly associated with selected Ubiquiti UISP and legacy wireless devices.

By comparison, modern UniFi access points often use standards such as:

PoE

PoE+

or higher-power PoE at around 48V.

Ubiquiti's current 15W UniFi U-PoE adapter, for example, outputs 48V DC at 0.32A, not 24V. 

Therefore:

Same RJ45 connector ≠ same electrical compatibility.

Do Not Use a 24V Adapter Just Because It Fits

This is one of the most important points when installing PoE equipment.

Both a 24V passive injector and a conventional Ethernet connection use RJ45 connectors.

That does not mean every Ethernet device can safely accept 24V passive power.

Before connecting equipment, verify:

• Required voltage

• Required current

• Maximum power consumption

• PoE type

• Pin arrangement

• Ethernet speed

• Hardware revision

Connecting an incompatible passive-PoE source can potentially damage equipment.

Gigabit Ethernet Support

The established POE-24-7W-G, POE-24-12W-G and POE-24-24W-G variants all provide Gigabit LAN connectivity according to Ubiquiti's current specifications. 

This is particularly important when powering modern outdoor radios.

A network path might look like:

Gigabit Router

↓

Gigabit Switch

↓

Gigabit 24V PoE Adapter

↓

Compatible Ubiquiti Radio

Using a Fast Ethernet injector in the middle of an otherwise Gigabit network could limit wired throughput to around 100Mbps.

Remote Reset Capability

Ubiquiti lists remote reset capability on its current 24V adapter variants. 

This functionality can be useful with compatible Ubiquiti devices because it can simplify maintenance of remotely mounted radios.

For example, an outdoor radio may be installed:

On a rooftop

On a mast

On a tower

On a remote building

Being able to reset compatible equipment without physically climbing to the device can simplify troubleshooting.

Reset Button

The current 24V adapter variants also include a reset button. 

The exact remote-reset behavior depends on the connected Ubiquiti equipment.

It should therefore not be assumed that every third-party 24V passive-PoE device will support Ubiquiti's remote-reset functionality.

Built-In Surge Protection

Ubiquiti incorporates surge protection into the POE-24 adapter family.

For the current 7W, 12W and 24W models, Ubiquiti specifies:

Maximum surge discharge: 1,500A using an 8/20μs waveform

and

Peak pulse current: 36A using a 10/1000μs waveform. 

This provides a degree of electrical protection for the power and data path.

Surge Protection Does Not Replace Proper Outdoor Protection

An injector's integrated protection should not be treated as a complete substitute for properly designed outdoor surge protection.

For rooftop, mast, tower and building-to-building installations, consider:

Shielded outdoor Ethernet cable

Correct grounding

Ethernet surge protection

Proper cable routing

Lightning-risk management

Outdoor radios can be exposed to substantially greater electrical risk than ordinary indoor network devices.

Wide 100–240V AC Input

Ubiquiti's current 24V PoE adapter variants accept:

100–240V AC

at:

50/60Hz.

This wide input range makes them suitable for many international electrical systems.

The adapter converts the AC input into the required 24V DC output for the connected device.

24V PoE for Outdoor Wireless Devices

One of the main applications of Ubiquiti's 24V passive-PoE ecosystem is powering remote outdoor wireless equipment.

A typical installation could look like:

Indoor Router

↓

Switch

↓

24V PoE Injector

↓

Outdoor Cat6 Cable

↓

Ubiquiti Outdoor Radio

The injector can remain safely indoors while the outdoor device receives both power and data over the Ethernet cable.

24V PoE for Point-to-Point Wireless Links

24V passive PoE is also commonly encountered in Ubiquiti point-to-point wireless installations.

A typical architecture might be:

Building A

Router

↓

24V PoE Adapter

↓

Outdoor Radio

)))))))) Wireless Link ((((((((

Outdoor Radio

↓

24V PoE Adapter

↓

Switch

Building B

The exact injector used on each side should match the specific radio.

24V PoE for Point-to-Multipoint Networks

The same powering concept can be used in compatible point-to-multipoint installations.

For example:

Internet Gateway

↓

Switch

↓

24V PoE

↓

Base Radio

↓

Wireless Clients

This type of architecture is commonly associated with WISP and long-range wireless networks.

Ubiquiti 24V PoE Adapter for airMAX

Many Ubiquiti airMAX products historically use 24V passive PoE, making the POE-24 family particularly relevant to WISP and point-to-point networking.

However, airMAX covers many product generations.

It is therefore better to check the exact model and hardware revision rather than assume that every airMAX device uses the same injector.

Ubiquiti 24V PoE Adapter for NanoStation

Various NanoStation generations have historically used 24V passive PoE.

A typical installation can be:

Router

↓

24V PoE Adapter

↓

Outdoor Ethernet

↓

NanoStation

However, the exact NanoStation model should be verified before selecting the adapter because power requirements vary across generations.

Ubiquiti 24V PoE Adapter for LiteBeam

Selected LiteBeam equipment also uses Ubiquiti's 24V passive-PoE ecosystem.

The injector allows the LiteBeam to be mounted outdoors while receiving its power from an indoor location.

Again, confirm the exact LiteBeam model because Ethernet and power specifications vary.

Ubiquiti 24V PoE Adapter for PowerBeam

Compatible PowerBeam equipment can similarly be powered through a 24V passive-PoE injector.

A professional installation should match:

PowerBeam model

↓

Required voltage

↓

Maximum consumption

↓

Ethernet interface

↓

Correct POE-24 adapter

This avoids selecting an injector based only on the Ubiquiti brand name.

Can a 24V PoE Adapter Power UniFi Access Points?

Some older or specific UniFi hardware may support 24V passive PoE, but many modern UniFi access points do not.

This distinction is important.

Current UniFi products increasingly use standards-based PoE, PoE+ or PoE++ power.

For example, Ubiquiti's current standard 15W UniFi PoE adapter outputs 48V DC, demonstrating that "Ubiquiti AP" does not automatically mean "24V passive PoE." 

Always check the exact access-point model before connecting a 24V injector.

7W vs 12W vs 24W Ubiquiti Adapter

The basic difference is available current and power.

Feature	7W	12W	24W
Voltage	24V	24V	24V
Current	0.3A	0.5A	1A
Approx. Power	7.2W	12W	24W
Gigabit	Yes	Yes	Yes
Remote Reset	Yes	Yes	Yes
Surge Protection	Yes	Yes	Yes

The correct choice is not automatically the 24W version.

Select the model supported by the powered device. 

Ubiquiti 24V PoE Adapter vs 48V U-PoE

Feature	24V POE-24	U-PoE 15W
Output Voltage	24V	48V
Typical Ecosystem	UISP / compatible legacy equipment	Modern compatible UniFi equipment
Power	Model dependent	15W class
Ethernet	Gigabit on G models	Gigabit
Passive Power	Yes	Adapter continuously supplies output
Interchangeable?	No	No

The U-PoE currently outputs 48V DC @ 0.32A, whereas POE-24 models output 24V. 

Voltage compatibility must therefore be checked before installation.

PoE Adapter vs PoE Switch

For one or two compatible 24V devices, individual adapters are often straightforward.

For example:

Switch

├── 24V Injector → Radio 1
└── 24V Injector → Radio 2

However, large installations may benefit from centralized powering equipment designed specifically for the required passive-PoE environment.

Conventional standards-based PoE switches should not automatically be assumed to provide 24V passive PoE.

Using a Ubiquiti 24V PoE Adapter with MikroTik

The data side of a Ubiquiti injector can be connected to a MikroTik router or switch.

For example:

MikroTik Router

↓

Gigabit Ethernet

↓

Ubiquiti 24V PoE Adapter

↓

Compatible Ubiquiti Radio

The router brand does not need to match the injector brand.

The critical compatibility is between the PoE output and powered device.

Using a Ubiquiti 24V PoE Adapter with TP-Link

The same principle applies to TP-Link.

For example:

TP-Link Router

↓

TP-Link Gigabit Switch

↓

Ubiquiti 24V PoE Adapter

↓

Compatible Ubiquiti Outdoor Radio

The TP-Link equipment carries normal Ethernet data.

The Ubiquiti injector then adds the required power for the compatible device.

Can Ubiquiti 24V PoE Be Used with Starlink?

Yes, as part of the local network when powering a compatible Ubiquiti device.

For example:

Starlink

↓

Router / Gateway

↓

Switch

↓

24V PoE Adapter

↓

Compatible Ubiquiti Outdoor Radio

The injector powers the Ubiquiti equipment.

It does not power the Starlink dish itself and does not increase Starlink's internet bandwidth.

Advantages of Ubiquiti 24V PoE Adapters

The 24V PoE family offers several practical benefits:

• Power and Ethernet over one cable

• Suitable for compatible Ubiquiti outdoor devices

• Gigabit versions available

• 7W, 12W and 24W options

• Remote reset on supported models

• Integrated surge protection

• 100–240V AC input

• Compact design

• Useful for point-to-point wireless links

• Useful for WISP installations

• Simplifies rooftop and mast installations

Ubiquiti continues to maintain the POE-24 family in its UISP technical catalogue. 

Limitations of Ubiquiti 24V PoE Adapters

The biggest limitation is compatibility.

24V passive PoE should not be confused with modern IEEE PoE standards.

A device designed for 48V PoE+ cannot simply be assumed to operate correctly from a 24V passive injector.

Similarly, the available power varies significantly between the 7W, 12W and 24W models.

Installers should therefore identify the powered device first and select the injector second.

Who Should Buy a Ubiquiti 24V PoE Adapter?

A Ubiquiti 24V PoE adapter is particularly appropriate for:

WISPs

Network installers

Point-to-point wireless deployments

Point-to-multipoint deployments

Compatible airMAX installations

Compatible NanoStation installations

Compatible LiteBeam installations

Compatible PowerBeam installations

Replacement of an existing matching 24V injector

It is not the correct default choice for every UniFi access point.

How to Choose the Correct 24V Adapter

Before purchasing, identify the exact device model and check:

1. Does the device support 24V passive PoE?

2. What is its maximum power consumption?

3. Does it need 0.3A, 0.5A, 1A or another rating?

4. Does it require Gigabit Ethernet?

5. Does it support remote reset?

6. What powering pinout does the manufacturer specify?

Only after these questions are answered should the injector be selected.

Ubiquiti 24V PoE Adapter Price in Kenya

Ubiquiti's current U.S. store lists the POE-24-12W-G at US$15, while the newer UACC-Adapter-PoE-24-12W is listed at US$8 at the time of checking. These are U.S. manufacturer-store references, not Orbitlink Solutions' Kenya selling prices. 

Kenya pricing can vary according to the exact model, exchange rates, freight, taxes, supplier and availability.

Contact Orbitlink Solutions for the current Ubiquiti 24V PoE Adapter price and stock availability in Kenya.

Why Buy Ubiquiti 24V PoE Adapters from Orbitlink Solutions?

The most important part of buying a 24V PoE injector is identifying the correct adapter for the powered device. Two Ubiquiti products can look similar yet require different voltages, current levels or PoE standards.

Orbitlink Solutions can help match compatible Ubiquiti radios and networking devices with appropriate 24V adapters, Ethernet cabling, routers, switches and surge-protection equipment. This is particularly important for outdoor wireless links where the injector forms only one part of the complete installation.

For point-to-point or WISP deployments, the full link should also be designed around the radio model, distance, line of sight, antenna characteristics, Ethernet requirements and electrical protection—not simply the injector wattage.

Watch the Ubiquiti 24V PoE Adapter Video

The Ubiquiti 24V PoE adapter is primarily a powering accessory rather than a device that improves network performance by itself. Its job is to deliver the correct electrical supply while passing Ethernet traffic to compatible equipment. Selecting a Gigabit or newer high-speed variant helps ensure that the injector does not unnecessarily restrict the Ethernet connection.

The most important technical distinction is the 24V passive-PoE architecture. It should never be assumed to be interchangeable with a 48V PoE, PoE+ or PoE++ source. This is particularly relevant when maintaining networks containing a mixture of older Ubiquiti outdoor radios and newer UniFi access points.

Ubiquiti's current range also shows how the 24V ecosystem is evolving. The established POE-24 family includes 7W, 12W and 24W Gigabit variants, while the newer UACC 24V 12W adapter provides a modern form factor and faster data connectivity. The correct choice should ultimately be based on the exact powered device rather than simply choosing the newest or highest-powered injector. 

Frequently Asked Questions About Ubiquiti 24V PoE Adapters

What is a Ubiquiti 24V PoE adapter?

It is an Ethernet power injector that supplies 24V DC passive PoE to compatible Ubiquiti equipment while carrying network data over the same Ethernet cable. 

Is the Ubiquiti 24V PoE adapter passive?

Yes. The POE-24 family is designed around 24V passive power delivery.

What Ubiquiti 24V PoE adapters are available?

Current documented variants include POE-24-7W-G-WH, POE-24-12W-G and POE-24-24W-G, plus the newer UACC-Adapter-PoE-24-12W.

What voltage does POE-24 output?

24V DC.

How much power does the low-power model provide?

The POE-24-7W-G-WH outputs 24V at 0.3A, or approximately 7.2W. 

How much power does POE-24-12W-G provide?

24V at 0.5A, giving 12W. 

How much power does POE-24-24W-G provide?

24V at 1A, giving 24W. 

Are the current POE-24 adapters Gigabit?

The current G variants documented by Ubiquiti provide Gigabit LAN ports. 

Does the newer 24V 12W adapter support 2.5GbE?

Ubiquiti's current store describes the UACC-Adapter-PoE-24-12W as a 12W adapter with 2.5 GbE connectivity.

Does it support remote reset?

The current POE-24 variants list remote-reset capability and a reset button.

Does it have surge protection?

Yes. Ubiquiti specifies difference- and common-mode surge protection. 

Can I use a 24V adapter with a 48V device?

Not unless the exact device explicitly supports 24V input. Never assume 24V and 48V PoE are interchangeable.

Can I use it with any UniFi access point?

No. Many modern UniFi APs require 48V standards-based PoE or PoE+. Check the exact AP specification first.

Can I use it with airMAX?

Many airMAX products use 24V passive PoE, but compatibility must be checked against the exact model.

Can I use it with NanoStation?

Selected NanoStation models use 24V passive PoE. Verify the exact model and revision.

Can I use it with LiteBeam?

Selected LiteBeam models use 24V passive PoE. Check the exact device specification.

Can I use it with PowerBeam?

Compatible PowerBeam models can use 24V passive PoE, but the exact power requirement should be verified.

Can it be used for point-to-point wireless links?

Yes. Powering compatible outdoor radios in point-to-point installations is one of its common applications.

Can I use it with MikroTik routers?

Yes. The LAN/data side can operate with MikroTik networking equipment. The important PoE compatibility is between the injector and the powered device.

Can I use it with TP-Link switches?

Yes. A TP-Link switch can supply ordinary Ethernet data to the injector.

Can it be used on a Starlink network?

Yes, to power compatible downstream Ubiquiti equipment. It does not power the Starlink dish itself.

Does a 24V PoE adapter increase internet speed?

No. It provides electrical power and passes Ethernet data.

Which Ubiquiti 24V PoE adapter should I buy?

Choose according to the exact powered device's 24V compatibility, current requirement, wattage and Ethernet speed.

What is the Ubiquiti 24V PoE adapter price in Kenya?

Contact Orbitlink Solutions for the current exact-model price and stock availability.

Buy Ubiquiti 24V PoE Adapter in Kenya

The Ubiquiti 24V PoE Adapter is a practical power solution for compatible Ubiquiti outdoor wireless and networking equipment. Current options include low-, mid- and high-power versions delivering approximately 7.2W, 12W and 24W, with Gigabit Ethernet, remote reset capability and integrated surge protection on the documented models. 

For installers working with airMAX, UISP and other 24V passive-PoE equipment, choosing the correct adapter is essential. Always match the injector to the exact device voltage, current, power and Ethernet requirements rather than assuming that all Ubiquiti PoE products are interchangeable.

Contact Orbitlink Solutions

Orbitlink Solutions
Lyric House, 7th Floor, Room S9, Kimathi Street, Nairobi
Call / Text / WhatsApp: +254 743 720 551
Email: info@orbitlinksolutions.co.ke
Alternative Email: orbitlinksolutions@gmail.com
Opening Hours: Monday–Saturday, 9:00 AM–6:00 PM
Availability: Nairobi pickup and nationwide delivery

 

Contact Orbitlink Solutions for the current Ubiquiti 24V PoE Adapter price in Kenya, stock availability and help selecting the correct 7W, 12W or 24W injector for your Ubiquiti radio or networking device.